SD 2080 double-sided adhesive circles

$5.75

.875″and 1.25″ diameter die-cut circles: 50 pieces per packet. These circles are scored on both the top and the bottom liner making it easy and quick to use them.

Compare

Description

SD 2080 double-sided adhesive circles:

SD 2080 is formulated and formed to provide the strongest possible hold. SD 2080 allows you to capture the most aggressive and active motions. With SD 2080, sports motion, including jumping, swinging, throwing and the like can be easily captured. In some cases, it is even possible to capture water-based activities.

To use:

Ensure that the bonding surfaces are clean, free of dust or debris, and moisture.
Remove either the top or bottom liner.
Apply the exposed adhesive surface to the marker base. Use some pressure to “set” the adhesive.
Remove the remaining liner and press, with some force, onto the bonding surface, i.e. skin, clothing or instrument.
“Testing” the bond by tugging the marker is not recommended as this can actually weaken the initial bond.
When finished, use finger tips to separate the adhesive from the marker base. Peel marker base away.
With thumb and index finger, pull the edge of the adhesive disk so that it begins to stretch the disk into an oval shape across the skin or clothing. Move slowly and avoid tugging straight up and away from the surface of the skin.
Remove any undo adhesive residue with our SAS Remover.